Decks .com - deck builders, contractors, plans, designs, materials. LOGIN
Contact Us

Ledger Board
Attaching the Ledger Board to Brick Siding - Decks.com Deck Ledger Board
Attaching the Ledger Board to Brick Siding

Brick may look like a sturdy wall to attach a deck to but that is not the case. Brick is only a siding and should never support much of the load if any at all. You should never attach a deck to just the brick. You should always go through the house band joist or house foundation wall and carriage bolt the deck to the home. The brick isn't attached to the home well enough to prevent a load shift and keep the deck from pulling way from the house all together. The deck may fall and take down the entire wall of bricks. When bolting on the ledger with any bolts you choose, do not tighten the bolt enough to crush the air space behind the brick wall. If the bolts are too tight, the wall can buckle, and the bricks above may fall down on top of you.  If you are attaching the deck to a brick wall, most of the load should be resting on a beam set close to the home.



content copyright © decks.com 2007

 
Sponsor Links

Wolmanized® Outdoor® Wood

Deck Railing

Fast & Proper Footing Forms

Maximize Outdoor Living Space!

Siberian Larch

Deck Cleaner - Brightener- Stripper

Hidden Deck Fasteners

Keep It Dry Under Your Deck

Post Caps

Deck Screws: No Splits, No Predrilling

Pressure Treated Wood

Stainless Steel Cable Deck Railing

Home | Deck Photos | Discussions | Login | Industry Links
Affiliates:bird breeders
Copyright © 2000 - 2009, Decks.com. All rights reserved. Terms of Use - Policies