|
EZ-Stairs
is an adjustable, heavy duty steel stair bracket system, which allows you to make automatic adjustments to form any rise or run you require. You only need two stringers for deck stairs up to 7’ in width and 9' in width for interior stairs. No center stringers are needed at all because riser acts as a load-bearing joist, giving you strong stairs. Most of the saw cuts are eliminated and require only three to four cuts per stringer.
These EZ-Stairs
brackets not only adjust, but are also approved as ‘joist hangers’. This allows you to attach 2” thick risers that span across the stair like floor joists, every 10” or 11” between the two stringers. This eliminates the need for several center stringers running down the stair as in conventional construction. Since there are only two stringers, you also eliminate the need to align and attach several cut stringers in order to build your stair.
The brackets also provide ‘code compliant’ rail post support. According to their accredited testing, the brackets are used to provide rail post support for any type of wood stair which meets the code requirement for 200lb. Lateral load at 42”. This has never been achieved on any wood stairs system.
This stair building system is much simpler and faster than conventional stair building, without sacrificing structural integrity or strength. The stairs turn out so well made that you won’t even hear a squeak. They can be used for deck stairs, concrete formwork and interior stairs: basement stairs, tongue and groove stairs.
How It Works: | 
